Products
Details |
Tire
Pressure Measurement (TP-1)
Measure Tire Pressures with
high accuracy. System uses the Techmor Wireless Link
(WL-1) to measure pressure builds, on-track. Highest
quality aerospace pressure sensor, with Titanium valve
stem mount.
Contact Techmor for
configurations and pricing. |
Details |
LASER Alignment (LA-1)
The Techmor LASER Alignment System (LA-1) provides
precision, non-contact measurement of wheel steering
angles, and camber angles. For Track or Rigs.
Contact Techmor for
configurations and pricing. |
Details |
Wireless Link Modules
(WL-1)
Use as a cable replacement
for 0-5V analog signals, or choose from a variety of
pressure, load-cell, temperature, LCD screens, USB, and digital CAN
bus models.
|
|
Details |
Tire
Temperature Stick (TS-1)
Measure
Tire Temperatures using this carbon fiber, triple
Infra-Red sensor. Internal Microcontrollers provide
ambient temperature compensation. Accurately tracks inner, middle,
and outer tread temperatures for chassis setup, and tire
analysis.
|
Details |
Axle Torque Measurement (HP-1)
Wireless system
measures axle torque and transmits to in-car receiver.
System consists of two instrumented axle shafts with
transmitter units, and a single in-car receiver. Output is analog (0-5V).
Contact Techmor for configurations and pricing. |
Details |
Steering-Wheel
Torque Sensor (SW-1)
Steering Wheel Quick-Release
Coupler with internal torque sensing. Output signal
is proportional to driver-applied torque. Can be
combined with an SG-1 (sold separately) for 0-5V output.
|
Details |
Analog to CAN Module
(AC-1)
Convert (16) 0-5V Analog
signals to CAN messages. This module can be used on
vehicles, test rigs and in the laboratory. Simple 4-wire
(Power and Communications) with 16-bit resolution.
Contact Techmor for configurations and pricing. |
|
Details |
Inertial Measurement Unit
(IM-1)
Full Six Degree of Freedom
Inertial Measurement Unit senses Roll, Pitch, and Yaw
Rates, as well as X, Y, and Z Accelerations. Compact unit
with simple 4-wire CAN communications, offers precise
motion tracking.
|
Details |
Splitter Support Load Cell
(SS-1)
Measure front splitter loads in tension (downforce), and
compression (track contact). These load cells connect the
splitter to the bumper, to gather information for car setup.
Standard load range is 250lb tension, 1000lb compression.
0-5V output.
Contact Techmor for configurations and pricing. |
Details |
Strain-Gage Amplifier
(SG-1)
Amplify strain-gage, load-cell, torque-cell, or pressure
sensor outputs to
convert a mVolt output to a 0-5V high-level signal.
Gain from 70 to 1280 and offset up to 5V for bi-directional
loads or torques.
|
|
Details
|
Current Sensor
(CS-1)
Measure electrical current
from -120A to 120A. Simply run a DC cable through
the ring, and the unit output (0 to 5V) is proportional to
current. Applications include current measurement of
batteries, alternators, fans, pumps, chillers, etc.
|
Details |
CAN-to-USB Converter
(CU-1)
Access a high-speed CAN bus. The Techmor CU-1 provides
the ability to read and interface a PC with CAN data. The
CU-1 can be used for logging, diagnostics, and system
testing. Standard USB connector for PCs/Laptops/and Netbooks. |
Details |
CAN Commander PC/Netbook Software
(CC-1)
View, log and create CAN data data.
Easy-to-use software works with the Techmor CAN Bus to USB
Converter (CU-1) to watch a single channel, or build a
complete logger system. Simply connect any Techmor
CAN sensor to the PC or Netbook, and get started. |
 |
Universal Controller
(UC-1)
Closed-Loop Controller for
Hydraulic Valves, Electric Motors, Relays, and more.
Features (16) Analog Inputs, (24) Digital Inputs or
Outputs, CAN Bus, Wireless Link, and 40MHz Processor.
|
Details |
Single Anemometer
(SA-1)
Precisely measure air speed. The SA-1 uses advanced hot-wire
technology to accurately measure air speed with no moving parts to
break, bind or wear out. 0-140mph range. Output is analog (0-5V), CAN Bus,
Serial RS232 or Wireless.
|
Details
|
Aero Pressure Sensor Module (AP-1)
Measure 16 individual aero
pressures for wind-tunnel, straight-line or track tests.
Fully digitized values output via RS-232, CAN or Wireless.
One box solution.
|
|
|
Product Categories
- Tire Pressure
Measurements
- Strain-Gage Amplifier
- Wireless Sensor Module
- Aero Pressure Tap
Sensors
- Universal Controller
Module
- Steering Wheel Torque
- Radiator Testing
- Anemometer Sensors
|
New
Products
The new Aero Pressure Tap Module
offers 16 channels without
consuming Analog channels.
The internal Analog-to-Digital
converters allow networking of
up to 8 units on the CAN Bus. |
| Specials
Contact Techmor for volume
discounts and distribution
opportunities. |
|
